Precautions On Using Demolition Hammer; Specifications; Standard Accessories; Prior To Operation - Hitachi H 41SC Handling Instructions Manual

PRECAUTIONS ON USING DEMOLITION
HAMMER
1. Wear ear protections
Exposure to noise can cause hearing loss.
2. Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.

SPECIFICATIONS

Voltage
Power Input
Full-load Impact Rate
Weight (without cord)
* Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

(1) Case .............................................................................1
(2) Bull point .......................................................................1
(3) Cylinder case cover .....................................................1
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES (sold separately)
NOTE
The round type bit with a collar cannot be attached.
○ Crushing
(1) Bull Point
Overall Length: 280, 450 mm
○ Asphalt Cutting
(1) Cutter
○ Surface Roughing
(1) Bushing Tool
○ Tamping
(1) Rammer
8
(2) Shank
(2) Shank
3. Do not touch the bit during or immediately after
operation. The bit becomes very hot during operation
and could cause serious burns.
4. Before starting to break, chip or drill into a wall, fl oor or
ceiling, thoroughly confi rm that such items as electric
cables or conduits are not buried inside.
220 V
810 W, 1050 W
3000/min
5.0 kg
○ Syringe (for debris removal)
○ Scooping Work
(1) Scoop
○ Side Handle
○ Hammer Grease A
500 g (in a can)
70 g (in a tube)
30 g (in a tube)
Optional accessories are subject to change without
notice.
APPLICATIONS
Breaking concrete, chipping off concrete, grooving, bar
cutting, and driving piles.
Application examples:
Installation of piping and wiring, sanitary facility installation,
machinery installation, water supply and drainage work,
interior jobs, harbor facilities and other civil engineering
work.

PRIOR TO OPERATION

1. Power source
Ensure that the power source to be utilized conforms
to the power requirements specifi ed on the product
nameplate.