Safety Symbols; General Safety Rules - Bosch GRL4000-80CH Operating/Safety Instructions Manual

The definitions below describe the level of severity for each signal word. Please read the
manual and pay attention to these symbols.
serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term "tool" in all of the warnings listed below refers to your mains-operated (corded) tool or
battery-operated (cordless) tool.
ALWAYS BE AWARE of their location when using the tool.
Do not direct the laser beam at persons or animals and do not stare into
the laser beam yourself. This tool produces laser class 2 laser radiation and
complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant
to Laser Notice No. 50, dated June 24, 2007. This can lead to persons being
blinded.
DO NOT remove or deface any warning or caution labels. Removing labels increases the
risk of exposure to laser radiation.
level after it has been dropped or subject to extreme temperatures and temperature variations.
immediately.

Safety Symbols

This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
Read manual symbol - Alerts user to read manual.
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
This symbol designates that this laser leveling tool complies with Part
15 of the FCC Rules.

General Safety Rules

Read all instructions. Failure to follow all instructions listed below may
result in hazardous radiation exposure, electric shock, fire and/or
The following labels are on your laser tool for your convenience and
safety. They indicate where the laser light is emitted by the tool.
LASER RADIATION. DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT. COMPLIES WITH 21 CFR
1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER NOTICE 50, 6/24/2007.
RADIACIÓN LÁSER. NO MIRE AL RAYO. PRODUCTO LÁSER DE CLASE 2. CUMPLE CON LAS NORMAS 21
CFR 1040.10 Y 1040.11, EXCEPTO POR LAS DESVIACIONES CONFORME AL AVISO PARA LÁSERES 50
DEL 24 DE JUNIO DE 2007.
RAYONNEMENT LASER. NE REGARDEZ PAS DIRECTEMENT DANS LE FAISCEAU. PRODUIT LASER DE
CLASSE 2. CONFORME À 21 CFR 1040.10 ET 1040.11, SAUF POUR LES ÉCARTS SUIVANT L'AVIS LASER
50, 24/6/2007.
It is the user's responsibility to periodically check the accuracy of the
laser level as work progresses. Always check the accuracy of the laser
If glass light house breaks when dropped, broken glass can cause
laceration hazard and unit to lose its IP rating. Contact customer service
IEC 60825-1:2014
<1 mW @ 635 nm
2
-10-