英 文 解 説 Guidance In English 17 - Philips 5000 Series Manual

English
Problem
The appliance
d oes not shave
as well as it used
to.
Water is leaking
from the bottom
of the appliance.
Possible cause
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
The shaving heads
are damaged or
worn.
Hairs or dirt obstruct
the shaving heads.
During cleaning,
water may collect
between the inner
body and the
outer shell of the
appliance.
Solution
Clean the shaving heads
thoroughly or replace
them. Also see 'Hairs or dirt
obstruct the shaving heads'
for a detailed description of
how to clean the shaving
heads thoroughly.
Replace the shaving heads
(see 'Replacement').
Clean the shaving heads
in the regular way or clean
them thoroughly.
To clean the shaving
heads thoroughly, remove
the shaving heads
from the shaving head
holder one by one (see
'Replacement'). Then
separate the cutter from
its guard and rinse each
matching set under the
tap. After rinsing, place
the cutter back into its
corresponding guard.
Finally, put the shaving
heads back into the
shaving head holder (see
'Replacement').
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the appliance.
37