Transporting The Aw4416; Vibration During Use - Yamaha AW4416 Operation Manual

Important points you must observe

Transporting the AW4416

When transporting the AW4416, you must disconnect all cables, and pack it in
the packing foam in which the unit was shipped (or the equivalent). If a CD-RW
drive (option) is installed, insert the protective pad that was included with it into
the drive.
• If you transport the AW4416 without packing it as described at the above, any
• Even if the AW4416 is packed as described at the above, any damage or mal-

Vibration during use

The internal hard disk or CD-RW drive of the AW4416 are very sensitive to vibra-
tion. Do not allow them to be subject to vibration or shock during operation, and
do not move the AW4416 while its power is turned on.
In particular, you must never apply physical shock or vibration while the access
indicator of the level meter/counter is lit, since this may damage the hard disk
itself.
18
— Operation Guide
damage or malfunctions that occur during transport may not be covered under
warranty.
functions that occur due to dropping the unit etc. may not be covered under
warranty. Please handle the AW4416 with care.