Advertisement
Installation Guide
Installing the PI in an Outdoor Cabinet
1
Install the PI in an outdoor cabinet.
CAUTION
When you install the PI in an outdoor cabinet, ensure
that the ground point of the auxiliary mounting bracket
is located on the lower side of the bracket.
2
Install the PGND cable.
26/27 >>
Installing the PI on a Wall
1
Install the mounting ears.
Mounting ears
3
Install the PI on the wall.
Big flat
washer
Nut
Small flat
washer
M6x60 expansion bolt
Mark and drill holes in the wall.
2
Hold the PI up to the wall and mark the drilling
positions. Drill the holes and insert the fixing bolts. The
position of the holes should allow a heat dissipation
space of at least 50 mm at both the top and bottom of
the PI.
Drill Ф8 holes to a
depth of 52 to 60
mm.
≥300mm
8
Drilling positions
4
Install the PGND cable.
PGND cable
M6
Install the PGND
1.4±0.14 N· M
cable with the
ground screw
(M6).
07
Advertisement
