Problem
COVER warning
The filter cover is not correctly attached.
indicator lights up.
The lamp cover is not correctly attached.
LAMP warning
Lamp running time has exceeded 2000
indicator lights up or
hours.
blinks.
The lamp has burned out.
TEMP warning indicator
The temperature inside the DPX-1100 is
lights up.
extremely high.
FAN warning indicator
The fan is broken.
lights up.
•
This unit uses a DMD
TM
chip for the picture display. Their highly accurate technology makes it possible to keep more than 99.99%
of effective pixels, however, unexpectedly it can produce less than 0.01% of ineffective pixels. In such a case, missing or flashing
of a few pixels can be found on the screen. These are characteristics of DMD
Cause
Remedy
Tightly attach the filter cover.
Tightly attach the lamp cover.
Replace the lamp with a new one.
Replace the lamp with a new one.
Check that the ventilation slots are not
covered.
Contact the store where the DPX-1100 was
purchased.
TM
, not mechanical problems.
Troubleshooting
11
57