Table of Contents
Advertisement
3.4.2
Following weighings
1.
To turn on the baby scale by pressing Power ON/OFF 0 button.
2.
Place the baby on the weighing scale when the digit "0.00" is
displayed.
3.
The weight of the baby will appear on the screen, press the
HOLD
button to stabilize the readings.
4. The measured weights stop flashing and following weight data
will display as alternating.
- Weight of baby
- Weight Change (Compare with last weighing)
Fig.1
Fig.2
Fig.3
6. The weight data will be saved in the memory of baby scale, the
weighing scale with turn off after 20 seconds if no any operation.
NOTE:
The weight data saved in scale memory will be erased when batter-
ies are removed or replaced, the weighing scale will start again from
"First Weighing" to record the weight data.
8
- if it is weight loss, the symbol
change are display on the screen (Fig.1).
- if it is weight gain, the symbol
change are display on the screen (Fig.2).
- No weight change was detected (Fig.3).
and weight
and weight
Using the Baby Scale
Advertisement
Table of Contents
