Connections - Yamaha AX-490 Owner's Manual

Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other
components to which connections are being made.
When making connections between this unit and other components, be sure all connections are made correctly, that is to say L
(left) to L, R (right) to R, "+" to "+" and "–" to "–". Also, refer to the owner's manual for each component to be connected to this
unit.
AX-590
Compact disc player
PHONO
MM/MC
CD
PRE MAIN
OUT IN
TUNER
COUPLER
Tuner
PHONO (MM/MC) switch
Select either MM or MC position depending on your PHONO cartridge,
Moving Magnet or Moving Coil type. However, if you use a high output MC
cartridge, select MM position.
To select the MC position, press this switch so that it is held inward. To
select the MM position, press this switch so that it is released outward.
4

CONNECTIONS

Turntable
OUTPUT
GND
GND
REMOTE
CONTROL
TAPE REC TAPE REC
PB OUT PB OUT
PHONO
TAPE 1 TAPE 2 AUX
Tape deck 1
AX-590 only
Tape deck 2
SPEAKERS
A
B
A B:l2 MIN./SPEAKER
A OR B:6 MIN./SPEAKER
Video cassette player,
LD player, etc.
: Refer to "ABOUT THE OTHER REAR PANEL PARTS" on page 6.
Speakers A
Right
AC OUTLETS
SWITCHED
l20V 60Hz
l00W MAX. TOTAL
Right
Speakers B
MM/MC
Left
To AC outlet
Left