Speakers - Yamaha RX-V795aRDS Owner's Manual

PREPARATION

Speakers

Use speakers with the specified impedance shown on the rear of this unit.
Right
Main speakers A
How to Connect:
Connect the SPEAKERS terminals to your speakers with the
wire of the proper gauge (keep as short as possible). If the
connections are faulty, no sound will be heard from the
speakers. Make sure that the polarity of the speaker wires is
correct. That is the + and – markings are observed. If these
wires are reversed, the sound will be unnatural and lack bass.
Caution
Do not let the bare speaker wires touch each other or any
metal part of this unit. This could damage this unit or the
speakers, or both.
20
Subwoofer system
MAIN
A
B
Left
Center speaker
CENTER REAR
OUTPUT
(SURROUND)
CENTER REAR
(SURROUND)
SUB
WOOFER
MAIN
A
CAUTION
MANUAL FOR CORRECT SETTING.
B
SPEAKERS
Red: positive (+)
Black: negative (–)
1
Rear speakers
Right
Main speakers B
SEE INSTRUCTION
Left
Loosen the knob.
Insert the bare wire.
2
[Remove approx. 5mm
(1/4") insulation from
the speaker wires.]
Tighten the knob and
secure the wire.
3
Left
Right