Display Panel - Yamaha RX-396 Owner's Manual

DISPLAY PANEL

MEMO
5
1
Multi-information display
Displays various information, for example station frequency,
preset station number and name of selected input source.
2
AUTO indicator
Lights up when this unit is in the automatic tuning mode.
3
STEREO indicator
Lights up when an FM stereo broadcast with sufficient signal
strength is received.
4
Signal-level meter
Indicates the signal level of the received station.
If multipath interference is detected, the indication decreases.
1
5
MEMO indicator
When the MEMORY button is pressed, this indicator flashes
for about 5 seconds. While this indicator is flashing, the
displayed station can be programmed to the memory by using
the A/B/C/D/E button and the preset station number selector
buttons.
6
SLEEP indicator
Lights up while the built-in SLEEP timer is functioning.
7
TAPE MON 2 indicator
Lights up when the tape deck (or MD recorder etc.) connected
to the TAPE 2 terminals on the rear of this unit is selected as
the input source by pressing the TAPE 2 MONITOR button.
2 3 4
AUTO STEREO
MHz
0 20 l00
TAPE MON
2
SLEEP
6 7
13