Advertisement
step 4: Slide 2 cabinet rails onto the pegboard rails. Ensure
there is enough room at the top for the wall cabinet. Attach 2
cabinet rails using 2x M6x16mm screws per rail. Attach second
pegboard, ensure grommet hole is at the top.
cabinet rail
pegboard
2 Door cabINet WItH Worktop:
cabinet
rail x2
pegboard
x1
© Jack Sealey limited
m6x16mm
screw x4
step 6: Attach 2x
cabinet rails to the
back of the base
cabinet using 3x
M6x16mm screws
per rail.
m6x16mm
screw x6
step 8: Slide 2 cabinet rails onto the
pegboard rails. make sure to leave
enough room at the top for the wall
cabinet. Place one pegboard on the
front, making sure the grommet hole
is on the top. Attach using 2x
M6x16mm screws per rail.
m6x16mm
screw x4
Original Language Version
step 5: Screw two M6x16mm screws, into
the back of the top cabinet, leaving a 0.8cm
gap. do not tighten bolts fully. Hang the wall
cabinet on the top of the posts, then fully
tighten the screws. Attach the bottom of the
wall cabinet to the posts using another 2x
M6x16mm screws.
step 7: Slide 2 pegboard rails fully onto the cabinet rails. Place
one pegboard on the front, making sure the grommet hole is on
the bottom. Attach using 2x M6x16 screws per rail.
pegboard rail x2
step 9: Screw 2x M6 x 16mm into the back of the
top cabinet, leaving a 0.8cm. Do not tighten bolts
fully. Hang the wall cabinet on the top of the rails,
then fully tighten the screws. Attach the bottom of
the wall cabinet to the rails using another two M6x
16mm screws.
APMSHFP series | Issue 1 21/10/19
m6x16mm
screw x2
m6x16mm
screw x4
m6x16mm
screw x2
Advertisement
