Advertisement
4. Planex GW-US54GXS Detailed Setup
(1) Unplug the network cable from SX-2000WG+, and Restart SX-2000WG+ (disconnect
and connect the power cable).
(a) Unplug the network cable
(b) Disconnect and connect
the power cable
(2) Please check if the top LED is blinking green.
(3) Plug GW-US54GXS into the PC.
(4) Click on "No, not this time" and select "Next".
All Rights Reserved. Copyright © 2008, Hitachi Software Engineering Co., Ltd.
Please refer to Trouble
Shooting 7(2)
13
Advertisement
