Be Prepared For Installation - AEG L7WE7631BI User Manual

Level of protection against ingress of solid particles
and moisture ensured by the protective cover, ex‐
cept where the low voltage equipment has no pro‐
tection against moisture
Water supply
Water supply pressure
2)
Maximum wash load
Maximum dry load
Spin Speed
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot
connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your do‐
mestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the
appliance inlet hose and the bottom of the water storage tank.
5. INSTALLATION
WARNING!
Refer to Safety chapters.
5.1 Be prepared for
installation
It is recommended that
installation is carried out by
two persons.
1)
Minimum
Maximum
Cotton
Cotton
Synthetics
Maximum spin speed
IPX4
Cold water
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
7 kg
4 kg
3 kg
1551 rpm
5.2 The appliance is equipped
with ...
A B C
x4 x2 x1
F G
x1 x2
x1 x2
ENGLISH 9
D E
x1 x1
H L
x1 x1