Asus VK266 Series User Manual page 14

2. Image
You can adjust brightness, contrast, sharpness, saturation,position (VGA
only), and focus (VGA only) from this main function.
• Brightness: the adjusting range is from 0 to 00.
activate this function.
• Contrast: the adjusting range is from 0 to 00.
• Sharpness: the adjusting range is from 0 to 00.
• Saturation: the adjusting range is from 0 to 00.
•
ASCR:Select YES or NO to enable or disable dynamic contrast
ratio function.
•
Over Drive:To speed up the respense time by Over drive technology.
the adjusting range is from 0 to 00
• Position: adjusts the horizontal postition (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 00.
• Focus: reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 00.
•
•
3. Color
Select the image color you like
from this function.
3-2
P1
(for some models)
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
(for some models)
P2
is a hotkey to
Chapter 3: General Instruction