Sharp SD-SG11 Operation Manual page 31

Recording the desired tracks of the CD
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button and load the desired CD.
3
Load a recordable MiniDisc into the MD compartment.
4
Press the or button to select the desired track.
5
Press the TRACK button to program the track number.
Selected track number
6


7
When the recording is finished, the selected tracks will be cleared.
To memorize a track while listening to it:
1
2
3
To clear the memorized tracks:
Press the CD
T-EDIT
Repeat steps 4 - 5 for other tracks. Up to 20 tracks can be pro-
grammed.
If more than 20 tracks are selected, "EDIT OVER" is displayed and the 21st track
will not be memorized.
Press the CD MD EDIT (HIGH/NORMAL) button to start record-
ing.
When you hear a track you want to record during playback, press the TRACK
button.


The track is memorized. (Maximum 20 tracks can be memorized.)
After the track is memorized, press the CD
Press the HIGH or NORMAL button to start recording.
button while in the stop mode.
01/7/9 25-37.fm
SD-SG11
button to stop playback.
E-28
E
F