Table of Contents
Advertisement
ARD-AYCE65B
6
Appendix
6.1
LED displays
Reader mode/action
Transmit mode
Transmitting card or PIN
data
Entering programming mode
1. Press 4 times the # key
2. Enter the 4 digit
programming code
Exiting programming mode
Press #
Selecting keypad transmission format
1. Enter programming mode
2. Press 1
3. Enter the no. for the
keypad transmission format.
4. Back to transmit mode
Selecting Proximity Card transmission format
1. Enter programming mode
2. Press 2
3. Enter the no. for the prxy
card transmission format.
4. Back to transmit mode.
Changing the Programming code
Bosch Sicherheitssysteme GmbH
Mode/Transmit LED
(left hand side)
(red)
(flash green)
(red)
(red)
(red)
(red)
(red)
Installation manual
Appendix | en
Door/Program LED
(right hand side)
(red)
(green)
and a beep
(green)
(green)
and three beeps
(green)
(green)
and three beeps
| V 1.1 | 2009.08
25
Advertisement
Table of Contents
