Table of Contents
Advertisement
2-2: WHITE BALANCE
1.
Place the set in Aging Test for more than 15 minutes.
2.
Receive the gray scale pattern from the Pattern
Generator.
3.
Press the INPUT button on the remote control to set to
the AV mode.
4.
Using the remote control, set the brightness and contrast
to normal position.
5.
Activate the adjustment mode display of Fig. 2-1 and
press the channel button (03) on the remote control to
select "R DRIVE (N)".
6.
Press the CH. UP/DOWN button on the remote control to
select the "R CUTOFF (N)", "B.DRIVE(N)", "B CUTOFF
(N)", "R DRIVE (C)", "R CUTOFF (C)", "B.DRIVE(C)", "B
CUTOFF (C)", "R DRIVE (W)", "R CUTOFF (W)",
"B.DRIVE(W)" or "B CUTOFF (W)".
7.
Adjust the VOL. UP/DOWN button on the remote control
to whiten the R CUTOFF (N), B.DRIVE(N), B CUTOFF
(N), R DRIVE (C), R CUTOFF (C), B.DRIVE(C), B
CUTOFF (C), R DRIVE (W), R CUTOFF (W),
B.DRIVE(W) and B CUTOFF (W) at each step tone
sections equally.
8.
Perform the above adjustments 6 and 7 until the white
color is looked like a white.
2-3: BRIGHT CENT
1.
Receive the monoscope pattern. (VIDEO Input)
2.
Press the INPUT button on the remote control to set to
the AV mode.
3.
Set the screen mode to FULL.
4.
Using the remote control, set the brightness and contrast
to normal position.
5.
Activate the adjustment mode display of Fig. 2-1 and
press the channel button (28) on the remote control to
select "BRIGHT CENT".
6.
Press the VOL. UP/DOWN button on the remote control
until the white 8.1% is starting to be visible.
7.
Receive the monoscope pattern. (RF Input)
8.
Press the INPUT button on the remote control to set to
the TV mode. Then perform the above adjustments 4~6.
9.
Receive the digital broadcast. (RF Input)
10.
Perform the above adjustments 4~6.
11.
Playback the DVD(480i) disc. (COMPONENT Input)
12.
Press the INPUT button on the remote control to set to
the YUV mode. Then perform the above adjustments
4~6.
13.
Playback the DVD(480i) disc. (HDMI Input)
14.
Press the INPUT button on the remote control to set to
the HDMI mode. Then perform the above adjustments
4~6.
ELECTRICAL ADJUSTMENTS
D-2
Advertisement
Table of Contents
