Setup
Media and Additional Parts
Description
Operator's Manual
Parts Catalog (not included)—refer to the
included postcard for information on obtaining
the Parts Catalog
Note:
Determine the left and right sides of the machine from the normal operating position.
Removing the Cutting Unit
from the Carton
1.
Slit the four corners of the carton so that the
sides lie flat.
2.
Remove the shipping caps from the wheel hubs.
Note:
Keep the shipping caps. Install them on
the wheel hubs to prevent grinding dust from
entering wheel bearing whenever you grind the
reel.
Installing the Wheels
1.
Remove the shipping caps from the wheel hubs.
2.
Install the drive wheels with cap screws and lock
washers
(Figure
3).
Figure 3
Qty.
1
Review the material and save it in an appropriate place.
–
Product Overview
Specifications
Weight
11 Blade
7 Blade
5 Blade
(All with 0.406 m (16 inch)
semi–pneumatic tires, without
draw bars)
Width
Height
g026925
5
Use
114 kg (252 lb)
112 kg (248 lb)
110 kg (243 lb)
1.054 m (41-1/2
inches) with iron
wheels, 1.143 m
(45 inches) with
semi–pneumatic tires
0.406 m (16 inches)
or 0.457 m (18 inches)
depending on tires