Panasonic AW-HE40 Manual
Audio (passing through) settings
Hide thumbs
Also See for AW-HE40:
- Operating instruction (138 pages) ,
- Installation & setup manual (12 pages) ,
- Quick start manual (2 pages)
Advertisement
Quick Links
AW-HE40 & AW-HS50 – Audio (Passing Through) Settings
★ AW-HE40 camera can superimpose the audio signal from an external microphone onto the video signal and can
output it.
Also, it can superimpose the audio onto SDI output through AW-HS50 switcher.
To allow the audio to pass through, both AW-HE40 camera and AW-HS50 switcher require changing the settings.
Schematic View
(AW-HE40)
Microphone
(AW-HE40 Rear Panel)
1．AW-HE40 Audio Settings
(Example 1) Using AW-RP50 Controller
*
Below is the explanation about the audio settings of a camera registered as [CAM1].
① Press the button 1 at <CAMERA STATUS/SELECTION>. – (Fig.1-A)
② Hold down CAMERA OSD button – (Fig.1-B) for 2 seconds to open the on-screen menu. (Hold it down again for 2
seconds to close the menu.)
③ Use F1 dial – (Fig.1-C) to set the item "Audio" to [On].
【Location】 System ＞ Others ＞ Others 4/4 ＞ Audio ⇒ [On] – (Figure 2 of next page)
* When "Audio" is [On], the audio-related setting items are available. Set them according to the installation
environment of your cameras. – (Figure 3 of next page)
（A）
(AW-HS50)
SDI Connection
HDMI Connection (*)
(*) The HDMI model requires an SDI converter
in order to connect with AW-HS50.
Specifications of External Audio Input Connector [AUDIO IN]
- Stereo mini-jack (φ3.5mm)
- Mic input: Input level
* Supported mic: Stereo mic (plug-in power), Supplied voltage: 2.5V±0.5V
- Line input: Input level
(Figure 1: AW-RP50 Control Panel)
SDI Connection
-60dBV±3dBV
-10dBV±3dBV
（B）
（C）
Recorder
(Video & Audio Recording)
* Default: Off
Advertisement
Related Manuals for Panasonic AW-HE40
Summary of Contents for Panasonic AW-HE40
- Page 1 AW-HE40 & AW-HS50 – Audio (Passing Through) Settings ★ AW-HE40 camera can superimpose the audio signal from an external microphone onto the video signal and can output it. Also, it can superimpose the audio onto SDI output through AW-HS50 switcher.
- Page 2 (Figure 2: AW-HE40 On-Screen Menu) Turn F1 to display “Others 4/4”. Select “Others” Select “System” and press F1. and press F1. Turn F1 to select [On]. (Figure 3: AW-HE40 On-Screen Menu) Input Volume: Setting for Mic/Line and its volume * Default: Line Middle...
- Page 3 (Example 2) Using Web Screen ① Start the Web screen. – (Figure 4) ② Follow the procedure below to enable the audio input from the device connected to the external input connector. Procedure: ［Setup］ ＞ ［Image/Audio］ ＞ ［Audio］ ＞ Audio ⇒ [On] * Default: Off * If the login screen is displayed, please enter the user name and password.
- Page 4 2．AW-HS50 Audio Settings * In order that the audio superimposed on an SDI input signal is can pass through, the setting change below is required. ① Hold down OSD ON button – (Fig.5-A) for 2 seconds to open the menu. (Hold it down again for 2 seconds to close the menu.) ②...