Setting Up Your Tablet - JVC AV-08NT310 User Manual

Battery:
This tablet has a built-in high capacity polymer battery. The run time depends on
the volume, types of apps/files played, as well as the battery settings. To increase
run time, you can adjust settings like 'user defined power off time' and 'display setup.
Charging:
To recharge, connect the microUSB end of the charging cable to the port on the tablet
and the USB end to the provided Charger. Please charge the device only with the
recommended USB cable and Charger. Other Chargers might damage the machine.
IMPORTANT: If the battery image is not displayed on the screen, press the power
button briefly to display the image, then press and hold the power button until the
logo is displayed.
Please Note:
1. The new battery may be empty and not charged when you buy the tablet.
2. If the tablet is not used for a long time, it is better to charge it to full capacity
every 2 or 3 months during storage.

Setting Up Your Tablet

5
A�er charging the ba�ery, press
and hold the power bu�on for up
to 5 seconds un�l the on screen
is displayed.