Advertisement
Power cord selection
For the United States and Canada
Use a UL listed and CSA labeled cord set consisting of a three conductor cord with a
maximum length of 15 feet.
For units which stand on a desk or table, type SVT or SJT cord sets shall be used.
For units which stand on floor, only SJT type cord sets shall be used.
The cord set must be selected according to the current rating for your unit.
Please consult the table below for the selection criteria for power cords used in the United
States and Canada.
Size of Conductors in Cord Maximum Current Rating of Unit
Cord Type
SJT
18 AWG
16 AWG
14 AWG
SVT
18 AWG
17 AWG
4
The power cord for this unit has been packed
separately and has been selected according
to the country of destination. It must be used
to prevent electric shock. Use the following
guidelines if it is necessary to replace the
original cord set.
The female receptacle of the cord set must
meet CEE-22 requirements (see Figure).
10 Amps
12 Amps
12 Amps
10 Amps
12 Amps
Advertisement
