Advertisement
7. Rotate the SIMM into the vertical position by
pushing gently on the top corners.
8. If the SIMM is properly located the SIMM should
remain in position held by the securing clips, and
with a small plastic lug through the holes on either
side of the SIMM.
Once all the SIMMs are installed reset the memory
configuration switches to the appropriate setting and
reassemble the computer. There is a label inside the
system unit identifying the switches and the appropriate
positions.
Reboot your computer with the Reference diskette and
reconfigure your system for the extra memory.
Warning
Always ensure that the system unit is fully reassembled
before powering it up.
13
Advertisement
