Environmental Conditions; Technical Support - Siemens SIMATIC IPC477E Product Information

Environmental conditions

Climatic ambient conditions
Permitted ambient temperature during operation
Temperature, tested according to IEC 60068-2-1, IEC 60068-2-2
At an ambient temperature > 40 °C, the device must be operated in an operating area in accordance with RAL.
When installed vertically in horizontal format
When installed inclined in horizontal format,
Vertical inclination max. ± 45°
When installed upright in vertical format,
Display rotated 90° vertical from the standard position
(Power supply is located at the top)
Temperature during storage/transport
Gradient
Note: For the "Performance Optimized" setting (see operating instructions for the standard devices, section "Assigning CPU
power consumption parameters"), the ambient temperature must be reduced by 9 °C when installed inclined and 5 °C in all
other mounting positions.
Relative humidity, tested in accordance with IEC 60068-2-78, IEC 60068-2-30
Operation
Storage/transport
Air pressure, in accordance with IEC 60068-2-13
Operation
Storage/transport
Protection against foreign objects and water
Degree of protection
Front
Rear panel
Mechanical ambient conditions
Vibration, tested according to DIN IEC 60068-2-6
Operation
Storage/transport
Shock resistance, tested in accordance with IEC 60068-2-27, IEC 60068-2-29
Operation
Storage/transport

Technical Support

Technical support for the products covered in the manual is available in the Internet at:
• Technical support (https://support.industry.siemens.com/cs/ww/en/)
• Support Request (http://www.siemens.com/automation/support-request)
• Service (http://support.automation.siemens.com/WW/view/en/16604318)
• Contact persons and office locations (http://www.automation.siemens.com/mcms/aspa-db/en/Pages/default.aspx)
• Training center (http://sitrain.automation.siemens.com/sitrainworld/?AppLang=en)
Additional information on SIMATIC products is available in the Internet at:
• Industry Portal (http://www.automation.siemens.com/_en/portal/index.htm)
• SIMATIC Documentation Collection (http://www.siemens.com/simatic-tech-doku-portal)
Siemens AG
Division Digital Factory
Postfach 48 48
90026 NÜRNBERG
GERMANY
SIMATIC IPC477E frameless
A5E50148832-AA, 10/2020
22
5 ... 85% at 30 °C, no condensation
5 to 95 % at 25/55 °C, no condensation
1080 hPa to 795 hPa, corresponds to an elevation of 1000 m to 2000 m
1080 hPa to 660 hPa, corresponds to an elevation of 1000 m to 3500 m
Explanation
When correctly installed: IP65 degree of protection possible.
IP00
No protection against contact with standard probes. No protection against ingress of
water.
10 Hz to 58 Hz: 0.0375 mm
58 Hz to 200 Hz: 4.9 m/s
2
5 to 8.4 Hz: 3.5 mm
8.4 Hz to 500 Hz: 9.8 m/s
100 m/s , 6 ms, 100 shocks per axis
2
250 m/s , 6 ms
2
+0 to +45 °C
+0 to +40 °C
+0 to +40 °C
-20 °C to +60 °C
Operating mode: Max. 10 K/h; no condensation
Storage: Max. 20 K/h; no condensation
2
SIMATIC IPC477E frameless
A5E50148832-AA, 10/2020