Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZWF 12380W
Summary of Contents for Zanussi ZWF 12380W
- Page 1 User manual Washing Machine ZWF 12380W ZWF 14380W...
-
Page 2: Table Of Contents
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Personalisation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7... - Page 3 • Always be sure, that there is no water leakage from hoses and their connections after the installation. • If the appliance is installed in a location subject to frost, please read the “dangers of freezing” chapter. • Any plumbing work required to install this appliance should be carried out by a qualified plumber or com- petent person.
-
Page 4: Product Description
Product description Detergent dispenser drawer Control panel Door opening handle Rating plate Drain pump Adjustable feet Detergent dispenser drawer Compartment for detergent used for prewash and soak phase or for stain remover used during the stain action phase (if available). The prewash and soak deter- gent is added at the beginning of the wash programme. -
Page 5: Table Of Symbols
Programme selector dial SPIN reduction button OPTIONS button EXTRA RINSE button Table of symbols Night Cycle Rinse Hold Programme selector dial, spin speed button and available options Programme Selector Dial It allows you to switch the appliance on/off and/or to select a programme. -
Page 6: Display
Super Quick Short cycle for lightly soiled items or for laundry which needs only freshening up. We recommend you to reduce the fabrics loading. Extra Rinse This appliance is designed for saving energy. If it neces- sary to rinse the laundry using an extra quantity of water (extra rinse), select this option. -
Page 7: First Use
• Heating phase During the washing cycle the display shows a temper- ature icon to indicate that the appliance has started the heating phase of the water in the tub. First use • Ensure that the electrical and water connections comply with the installation instructions. - Page 8 Pull out the dispenser drawer until it stops. Measure out the amount of detergent required, pour it into the main wash compartment or in the appropriate com- partment if the selected programme/option it requires (see more details in "Detergent dispenser drawer"). If required, pour fabric softener into the compartment marked (the amount used must not exceed the...
-
Page 9: Helpful Hints And Tips
Altering an option or a running programme It is possible to change some options before the pro- gramme carries them out. Before you make any change, you must PAUSE the ap- pliance by pressing the button 6 . Changing a running programme is possible only by re- setting it. -
Page 10: Removing Stains
Removing stains Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washing. Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water. -
Page 11: Washing Programmes
- Type of Laundry Cottons 90° Main wash - Rinses Maximum spin speed 1200 rpm for model ZWF 12380W (1400 for model ZWF 14380W ) Max. load 7 kg - Reduced load 3,5 kg White and fast coloured cotton (heavily or normally soiled items). - Page 12 Max. load kg 3,5 - Reduced load kg 2 Delicate fabrics: acrylics, viscose, polyester. Rinse Rinses Maximum spin speed 1200 rpm for model ZWF 12380W (1400 for model ZWF 14380W ) Max. load 7 kg With this programme it is possible to rinse and spin cotton garments which have been washed by hand.
- Page 13 Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Spin Drain and long spin Maximum spin speed 1200 rpm for model ZWF 12380W (1400 for model ZWF 14380W ) Max. load 7 kg Separate spin for hand washed garments and after programmes with the Rinse Hold or Night Cycle option selected.
-
Page 14: What To Do If
Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Sport Shoes 40° Main wash - Rinses Maximum spin speed at 900 rpm Max. load: 1 pair of shoes With this programme it is possible to wash one pair of sport shoes (or 2 pairs if they are small). - Page 15 Problem The machine does not start: The machine does not fill: The machine does not empty and/or does not spin: Possible cause/Solution The door has not been closed. • Close the door firmly. The plug is not properly inserted in the power socket. •...
- Page 16 Problem There is water on the floor: Unsatisfactory washing results: The door will not open: The machine vibrates is noisy: Possible cause/Solution Too much detergent or unsuitable detergent (creates too much foam) has been used. • Reduce the detergent quantity or use another one. Check whether there are any leaks from one of the inlet hose fittings.
-
Page 17: Technical Data
Information on the electrical connection is given on the rating plate, on the inner edge of the appliance door. Minimum Maximum Cotton Maximum Ser. No..60 cm 85 cm 60 cm 63 cm 0,05 MPa 0,8 MPa 7 kg 1200 rpm (ZWF 12380W) 1400 rpm (ZWF 14380W) -
Page 18: Consumption Values
Consumption values Programme White Cottons 90° Cottons 60° Cotton ECO 60° Cottons 40° Synthetics 40° Delicates 40° Wool/ Handwash 30° 1) «Cotton Eco» at 60°C with a load of 7 kg is the reference programme for the data entered in the energy label, in compliance with EEC 92/75 standards. - Page 19 Replace the drawer and run the rinse programme with- out any clothes in the drum. Cleaning the pump The pump should be inspected if: • the machine does not empty and/or spin; • the machine makes an unusual noise during draining due to objects such as safety pins, coins etc.
-
Page 20: Installation
• Unscrew the hose from the machine. Keep a rug nearby because some water may flow. • Clean the filter in the valve with a stiff brush or with the piece of cloth. 35° • Screw the hose back to the machine and make sure the connection is tight. - Page 21 Unscrew the three bolts. Slide out the relevant plas- tic spacers. Open the porthole and re- Fill the smaller upper hole move the polystyrene and the two large ones block fitted on the door with the corresponding seal. plastic plug caps supplied in the bag containing the instruction booklet.
- Page 22 Warning! Installation should comply with local water authority and building regulations’ requirements. The appliance must be connected to a cold water supply. A minimum water pressure of 0.05 MPa (0.5 bar) is required for safe operation of the appliance. If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system.
- Page 23 protrude a few centimetres beyond the edges of the ap- pliance. Warning! The appliance should NOT be placed on deep pile carpeting. Note! Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.
-
Page 24: Environment Concerns
for the required load in compliance with the current elec- trical regulations. Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. - Page 28 www.zanussi.com...