14
Operating
General Settings menu
You can adjust general setting values of the LCD touch panel.
Display
You can adjust brightness of the screen or screen timeout setting on [Display].
2
Date and Time
You can adjust current time and date on [Date and Time].
NOTE
y When there is a power failure while operating, you do not have to re-setting the [Date & Time] settings
within 15 hours. If there is no power back within 15 hours, [Date & Time] settings should be set again.
y If the system is re-operated, the [Date & Time] settings may not correct. Check the [Date & Time] settings
in such condition and set them correct.
y When you set the [Date & Time] to the past, the Energy Analysis data may differ from Web monitoring
data.
[Brightness]
Tab [Display] on [General Settings]. Display setting menu is displayed.
Tab A or D to adjust the brightness of LCD touch panel. You can
adjust from [1 Level] to [5 Level]. The screen darkens when selecting
A brightens when selecting D .
[Screen Timeout]
Tab A or D to adjust the desired time. If there is no operation within
selected time, the LCD touch panel will turned off automatically.
[Time Zone]
Displays time zone where you installed this product.
[Date & Time]
Select current date and time. If the date and time already have been
set by the [Get time from Internet] function, the [Date & Time]
option will be disabled.
1. Select the currently selected value. Date setting menu is displayed.
2. Adjust [Year], [Month], and [Day] using S or W .
3. Select [NEXT] to complete the date setting and then time setting
menu is displayed.
4. Adjust [Hour], [Minute] and [pm/am] using S or W .
5. Select [ACCEPT] to complete the setting.
[Get time from Internet]
Select the [Get] to set the time and date via internet automatically.
Internet connection is required to use this function.