Product Description; Intended Use; List Of Versions; Scope Of Delivery - Bosch BSA 43 Series Product Description

3.

Product description

�.1

Intended use

Warning of possible damage or injury
Safe operation of the BSA 43xx cannot be
guaranteed for applications not conforming
to the intended purpose.
¶
The BSA 43xx is only ever to be employed
for the intended purpose.
¶
The user is not authorized to convert or
modify the BSA 43xx.
¶
Always heed the specifications of the cor-
responding vehicle manufacturer (operat-
ing instructions) as regards the perfor-
mance of brake tests.
The BSA 43xx is only to be used for checking brake
systems on double-track vehicles. The specifications
relating to permissible track width, maximum axle load
and 4WD capability are listed in Tab. 1.
The BSA 43xx provides all the brake test result data de-
manded by official test bodies (e.g. for Germany
§ 29 StVZO in conjunction with appendix VIII for gen-
eral inspections).
The following also applies with regard to the intended
use:
R
Read and observe all the documents accompanying
the BSA 43xx.
R
Ensure compliance with the technical data for the
BSA 43xx and all its components.
R
Always heed the safety instructions when performing
work.
R
Only operate the BSA 43xx in the proper manner.
R
Ensure correct working procedures when performing
all brake tests.
R
Perform maintenance work in due time.
Any application beyond the scope of these specifica-
tions does not constitute the intended purpose and
could result in serious injuries or damage. The manu-
facturer cannot accept any liability for injury or damage
arising from such usage.
Robert Bosch GmbH
Product description | BS� ���� | 17
�.2

List of versions

Version
BSA 4310 -
BSA 4311 -
BSA 4312 -
BSA 4313 -
BSA 4340 x
BSA 4341 x
BSA 4342 x
BSA 4343 x
BSA 4361 x
Tab. 1: Versions of BSA 43xx
�.�

Scope of delivery

The scope of delivery of the roller dynamometer inclu-
des the following components:
R
Set of hot-dip galvanized rollers (for track width
refer to Tab. 1)
R
Analog display (2x) 8 kN
R
Master switch box with assembly set and 15 m
power cable.
R
Infrared (IR) remote control unit.
R
30 m BNet device bus cable.
R
CD-ROM BNet
Special accessory with certain versions
1)
�.�

Special accessories

Foundation work:
Component
Edge protection frame for BSA 43xx
(not BSA 436x)
Edge protection frame for BSA 436x
Roller cover plates
Component
Swivelling (not BSA 436x)
Clip-in (not BSA 436x)
Clip-in for BSA 436x
BS� ���� | 17 | 17
2200 2.7 3.5 Plastic /
corundum
2200 5.2 2.5 Plastic /
corundum
2200 2.7 3.5 Spike
2200 5.2 2.5 Spike
2200 2.7 3.5 Plastic /
corundum
2200 5.2 2.5 Plastic /
corundum
2200 2.7 3.5 Spike
2200 5.2 2.5 Spike
2800 5.2 2.5 Plastic /
corundum
1)
Order number
1 691 602 000
1 691 602 151
Order number
1 691 601 011
1 691 601 010
1 691 602 112
|
1 691 606 210 2010-09-21
en