Mitsubishi Electric 800 Series Instruction Manual page 8

Main circuit terminals
 Wiring cover and handling (FR-F860-00450 or lower)
• Removal of the wiring cover
(1) Remove the inverter front cover (lower side). (For the details on how to remove the front cover (lower side), refer to the Instruction Manual (Detailed).)
(2) Loosen the fixing screws, and remove the front lid of the wiring cover.
(3) Loosen the fixing screws that fix the wiring cover to the inverter, and remove the wiring cover.
Screws for earthing (grounding)
NOTE
• Always use fixing screws when attaching the wiring cover to the inverter. Otherwise, the inverter may be damaged.
The table below shows the locations of the fixing screws and the screws for earthing (grounding). Locations are shown for each capacity.
FR-F860-00027 to 00090
Screws for earthing
(grounding)
FR-F860-00320
Screws for earthing
(grounding)
8
WIRING
Fixing screws
Fixing screws
Fixing screws
Fixing screws
FR-F860-00320
FR-F860-00320
FR-F860-00170
Fixing screws
Screws for earthing (grounding)
FR-F860-00450
Fixing screws
Screws for earthing
(grounding)