Fault Rectifi Cation; Malfunction Causes And Remedies - Silvercrest SMA 500 A1 Operating Instructions Manual

Fault rectifi cation
This section contains important information on fault localisation and
rectifi cation. Observe the instructions in order to avoid risks and
damage.

Malfunction causes and remedies

The following table will help with localising and remedying minor
malfunctions:
Defect
No sound.
NOTE
► If the aforementioned solutions do not resolve the problem,
please contact the Customer Service (see chapter Service).
SMA 500 A1
Possible cause
The volume control
of the player or the
speaker is set to mini-
mum volume.
Playback device or
speaker not switched on.
The 3.5 mm jackplug
is not fully inserted
into the socket of the
playback device
The battery of the
speaker is discharged
3
(operating LED
illuminated in red or off ).
Rectifi cation
Turn the volume up on
the playback device
or the speaker.
Ensure that all devices
are switched on.
Push the 3.5 mm
jackplug completely
into the
socket.
Charge the battery
with the charging
cable (see also
9
chapter Charging
the battery).
GB
11