Connect External Hdmi Display(S); Connect Ethernet Cable; Connect Power Cable - Lenovo ThinkSmart Hub 500 Deployment Manual

ThinkSmart Hub 500 Hardware Deployment Guide for all UC Platforms
3. Connect a USB camera into any of the 4 USB ports

Connect External HDMI Display(s)

The Hub 500 has two HDMI OUT ports that can drive two external displays at 1920x1080 (HD) resolution.
You should plan to connect at least one external display.
4. Insert the cable(s) for HDMI display(s) into the appropriate port(s) and align the cable(s) into the
corresponding groove(s).

Connect Ethernet Cable

5. Insert the Ethernet cable into the appropriate port and align the cable into the corresponding
groove. Best practice is to setup and run the Hub 500 on a wired connection.

Connect Power Cable

6. Take the yellow end of power cable and insert it in far-left port.
Insert USB Camera cable
HDMI cable(s)
Ethernet Cable
7