Canon imagePRESS C800 Series Troubleshooting Manual page 232

Chapter 1
1) Press [Off] for "SMTP RX" > [On] for "POP".
2) Press [E-Mail Address] > Enter the e-mail address > press [OK].
3) Press [POP Server] > Enter the IP address or name for the POP server > press [OK].
4) Press [POP Login Name] > Enter the POP login name > press [OK].
5) Press [POP Password] > Enter the POP password > press [OK].
6) Specify the time interval to automatically check the POP server in "POP Interval".
7) Press [Authent./Encryption] > set "POP AUTH Method".
8) Set "Allow SSL (POP)" > press [OK].
If you want to send encrypted data, set "POP" to "On".
[Caution]
- If you set less than 10 minutes (excluding '0 min') for "POP Interval", the machine will not enter a complete Sleep mode.
- Even if you select [On] for "Allow SSL (POP)", the data will not be encrypted if the POP server does not support encryption.
1-218