Download Print this page

LG EnerBox2 Quick Setup Manual page 2

Advertisement

Safety instructions
Please take note of the safety instructions to prevent any potential
accident or misuse of the gateway.
Safety precautions are given in two forms, i.e. Warning and Caution as
detailed below.
Failure to follow the instructions may cause serious
injury and even death.
Failure to follow the instructions may cause injury
to persons or damage to the product.
˙Do not place the product in direct sunlight or near heat sources such
as radiator, fires, stoves, etc.
– This may cause fire.
˙Do not allow children to cling to the Product.
– This may cause the product to fall, causing injury or death.
˙Do not place the product on a place which can be reached by oil or
steam such as a cooking table or humidifier.
– An electric shock or fire may occur.
˙Do not use the product in damp places like a laundry room or
bathroom.
– Moisture may cause a glitch or an electric shock.
˙Plug the power cord tightly into the outlet.
– Loose connection of the power cord could cause a fire.
˙Do not place heavy objects on the power cord.
– This may cause fire or electric shock.
˙Never touch the power cord with your hands wet.
– Otherwise, an electric shock may occur.
˙Operate the product at the proper voltage (AC 120 V).
– Excessive voltage may result in damage on the product, electric
shock or fire.
˙Pull the plug, not the cord, to disconnect the power.
– Otherwise, a fire may occur or the product may get damaged.
˙Do not impair the cord by bending or pressing it too hard. Keep
children and pets from damaging the power cord.
– An impaired cord could damage the product parts causing a fire or
an electric shock.
˙Do not insert a metal chopstick or other conductors into a hole of the
outlet when the power cable is connected to the outlet. Do not touch
the plug right after disconnecting it from the outlet.
– Otherwise, an electric shock may occur.
˙Please use the power cord certified by LG Electronics.
– Using a non-certified product may result in a fire and electric shock.
˙Do not disassemble, repair, or revamp the product.
– An electric shock or fire may occur.
– If you need a checking, adjustment, or repair, contact the service
center.
˙Do not place anything containing liquid on top of the product, such as
a vase, flower pot, cup, cosmetics, or medicine; or ornaments, candles,
etc.
– This may cause fire or electric shock, or injury due to falling.
˙Do not spray water directly to the product when cleaning. Do not
allow water to get into the product or do not allow it to get wet.
– This may cause fire or electric shock.
˙To avoid damage and explosion of the gateway, do not use at
temperatures outside of 0 °C to 60 °C (32 °F to 140 °F).
˙Place the product in a safe place so that it does not fall.
– If dropped, the product could be damaged and even cause an injury.
˙Place and use the product indoor only.
– Otherwise, this may cause damage to the product.
˙Do not connect the product to power strips, surge protector or surge
protector-embedded power strips. It is recommended the gateway is
directly connected to a 120V AC outlet.
– Otherwise, communication interference may occur.

Advertisement

loading

This manual is also suitable for:

Enervu2