Sealey WF10Q Instructions

thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. CONTENTS
section 2. General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
section 2.1 Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
section 2.2. technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
section 3. safety/operational Instructions. . . . . . . . . . . . . . . . . . .2.
section 4. Maintenance/Examination/Inspection. . . . . . . . . . . . . .2.
section 5. Assembly, storage and Bleeding . . . . . . . . . . . . . . . . .3.
section 6. owner's & operator's responsibilities . . . . . . . . . . . . .4.
section 7. troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.
section 8. Declaration of conformity. . . . . . . . . . . . . . . . . . . . . . .5.
section 9. Parts List/Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.
2. GENERAL
2.1 Identification
supplier: sealey Power Products,
Kempson Way,
suffolk Business Park,
Bury st Edmunds,
suffolk, IP32 7Ar.
Wf10Q
Model no:
2.2 Technical Data
Rated Capacity
safe Working Load (sWL) 1t (tested to 50% overload).
Working Load Limit (WLL) 1t (tested to 50% overload).
Lifting cap. in Position 1: . . . . . . . . . . . . . . 1000kg
Lifting cap. in Position 2: . . . . . . . . . . . . . . 900kg
Lifting cap. in Position 3: . . . . . . . . . . . . . . 800kg
Lifting cap. in Position 4: . . . . . . . . . . . . . . 700kg
Lifting cap. in Position 5: . . . . . . . . . . . . . . 600kg
Maximum Lift Ht. at Minimum Jib Extn: . . . 1978mm
Maximum Lift Ht. at Maximum Jib Extn: . . . 2170mm
Length of Jib Position 1: . . . . . . . . . . . . . . . 620mm
Length of Jib Position 2: . . . . . . . . . . . . . . . 720mm
Length of Jib Position 3: . . . . . . . . . . . . . . . 820mm
Length of Jib Position 4: . . . . . . . . . . . . . . . 920mm
Length of Jib Position 5: . . . . . . . . . . . . . . . 1020mm
a) Design capability: test Load 50% overload.
b) for a description of in-service and out-of-service conditions see
section 3 safety, section 4 Maintenance and section 6.
c) the crane is fitted with a bypass valve that will prevent the ram
from over extending.
d) for applications see section 3 safety.
e) for control system, see fig.1 for release valve and pump handle
assy. usage is explained in section 3.2 operation.
f) for ground condition requirements, see section 3 safety.
g) for information on parts and materials requiring specialised
repair techniques see section 4 Maintenance.
InstructIons for:
1 TONNE, QUICK LIFT,
FOLDING ENGINE CRANE
MoDEL no: WF10Q
Page No.
Height of frame:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110mm
Length of frame: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1520mm
overall Height: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1500mm
Maximum Width of frame: . . . . . . . . . . . . . . . . . . . . . . . . 1160mm
Width Inside frame: . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1055mm
Distance between centres of rear Wheels: . . . . . . . . . . . 262mm
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84kg
Page 1
Original Language Version
900kg Max.
1000kg Max.
1520mm
fig.1
PuMP HAnDLE AssY.
rELEAsE VALVE
600kg Max.
700kg Max.
800kg Max.
Wf10Q Issue: 2 - 01/04/10