Sony HDCU2500 Maintenance Manual page 95

C04: MONITOR 2
Menu Image
<MONITOR 2> C04 TOP
LEVEL-GATE : ---
Y-LEVEL1 49%~ 61% -25
Y-LEVEL2 74%~ 108% -25
GATE-MARKER: --- :
MODURATION : --- :
MARKER : OFF
: 4:3
C05: I/F SETUP
Menu Image
<I/F SETUP> C05 TOP
BOARD FRONT REAR
SLOT1:DRX-9 => HIF-62
SLOT2:RC-105 => HIF-26
SLOT3:(NONE) => (NONE)
DSUB-15: MIC-REMOTE
CHARA/SYNC: CHARACTER
REAR PREVIEW: MOMENTARY
HDCU2500
Item Settings
LEVEL GATE ---, 1&2, 1, 2,
OFF
0
0
Y-LEVEL1 0 to 108%
–99 to 99
Y-LEVEL2 0 to 108%
–99 to 99
GATE-MARK- ---, ON, OFF
ER
–99 to 99
MODULA- ---, ON, OFF
TION
-99 to 99
MARKER ON, OFF
4:3, 13:9, 14:9,
EU VISTA, VIS-
TA, CINEMA,
FOLLOW DC
Item Settings
BOARD FRONT, REAR
SLOT1 BOARD NAME
DISPLAY
SLOT2
SLOT3
DSUB-15 MIC-REMOTE,
WF-REMOTE
CHARA/ CHARACTER,
SYNC SYNC
REAR PRE- MOMENTARY,
VIEW TOGGLE
Description
1&2: Displays level gate 1 and 2.
1: Displays level gate 1.
2: Displays level gate 2.
---: Displayed when camera not connec-
ted, video output not set to CAMERA, or
video output is set to CAMERA and
GATE MARKER is ON. (Display only)
Sets the level gate 1 minimum and max-
imum detection level.
Sets the level gate 1 zebra range.
Sets the level gate 2 minimum and max-
imum detection level.
Sets the level gate 2 zebra range.
Sets the gate signal display to ON/OFF.
---: Displayed when a camera is not con-
nected. (Display only)
Sets the gate signal level.
Sets the 4:3 aspect ratio mask function to
ON/OFF when EDGE CROP is set to
ON.
---: Displayed when a camera is not con-
nected. (Display only)
Sets the mask video level.
Sets the marker signal to ON/OFF.
Selects a superimposed marker signal.
Description
Display only
Detects and displays the boards installed to
the front/rear of the CCU. (Display only)
Sets the output for the MIC REMOTE con-
nector.
Sets the output for the CHARACTER/
SYNC connector.
Selects the REAR PREVIEW output oper-
ating mode.
3-19