Instruction About Disassembling Smart Core - Sony RB1G Service Manual

2018/06/22 14:39:14 (GMT+09:00)
Safety Notes

1-3. Instruction about Disassembling Smart Core

1. Remove screws.
SCREW PSW M3ｘ6 SCREW +PSW M3ｘ6
a) HG/MD/LK/LS/MW Model
（ONLY HG）
SCREW +BVTP 3ｘ10
Recommended disassemble position
2. Take off Harness from Hook. 2 Take off Harness from Hook
a) HG/MD/LK/LS/MW Model
SCREW +PSW SCREW +PSW
b) TE Model
M3ｘ6
SCREW +BVTP 3ｘ10
ORNAMENT
Lay the display face down on a
work surface that is lager than
the TV and make space in front
of ORNAMENT.
b) TE Model
3. Remove Smart Core Cover.
a) a) HG/MD/LK/LS/MW Model
Smart Core Cover
Pull left side.
Don't pull right side. Don't pull right side
4. Remove Smart Core from SET.
a) a) HG/MD/LK/LS/MW Model
Rotate Smart Core to direction
b) TE Model
Smart Core Cover
Pull left side.
have a hook only right side. have a hook only right side.
unplug
7
SYS SET