Philips Compac CTX6 Series Quick Manual

codes and standards
• ETL Listed to UL Standard 924
• NFPA 101 (Life Safety Code)
• NFPA 70 (National Electric Code)
construction
• Flame rated, UV stable ABS thermoplastic white
housing.
• Low profile test switch comes standard on the unit.
• Contemporary design external square style lamp
heads that utilize an innovative track system that
allows for a full range of adjustment for emergency
illumination.
installation
• Snap together quick mount design.
• Universal J-box mounting pattern.
electronics Xtest
• All units utilize a microprocessor and contain the
Xtest self-diagnostic/self-test circuitry.
• Each unit includes low voltage disconnect, AC
lockout, and brownout protection.
• Each unit with Xtest circuitry will automatically
conduct a self-test once a month with the lamps on
to verify all systems are functioning properly. For
complete details regarding Xtest circuitry see spec
sheet CE-17050.
• 120/277VAC selectable input.
• Power Consumption:
120V= 42 mA Line Amps
= 5.1W input Wattage
277V= 22.6 mA Line Amps
= 6.26W input Wattage
Green Product Choice: CTX6
Catalog Number Volts Total Wattage
Lead Calcium:
CTX6 6 12
CTX618 6 18
Accessories (Order Separately)
WG5 – Wire Guard
PCS1 – Polycarbonate Vandal Shield
Footnote:
Refer to CA-51300 for matching remote lamp heads.
1
CM-22200 08/16 page 1 of 2
lamps
• Standard unit contains two 6 volt, 5.4W
tungsten lamps.
• The 18 Watt unit comes standard with 9W
tungsten lamps.
battery
• 6V Maintenance free sealed lead acid battery.
• Operating temperature range is 65˚F (19˚C) to
85˚F (30˚C).
• Provides a minimum of 90 minutes emergency
illumination.
warranty
• Five year warranty on unit (lamps not included).
Remote Housing Color LampType
1
None White 5.4W tungsten
None White 9W tungsten
CM-22200
Commercial Emergency
CTX6 Series
Compac Thermoplastic
®
Emergency Unit with
Specifier's Reference
Project
Type
Model No.
Comments
Xtest