Sealey SCR85 Instructions

thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
instruction
manual
1. saFetY
‰ ‰ warNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this creeper.
‰
‰
locate creeper in a suitable working area.
9
‰ ‰ warNING! use creeper on level and solid ground, preferably concrete.
‰
‰
Keep the creeper clean and tidy in accordance with good workshop practice.
9
‰ ‰ Do Not use the creeper for any purpose other than that for which it is designed.
‰ 8
‰ ‰ Do Not stand on the creeper.
‰ 8
‰ ‰ Do Not get the creeper wet or use in damp or wet locations or areas where there is condensation.
‰ 8
‰ ‰ Do Not clean the creeper with any solvents which may damage the paint surface or padded areas.
‰ 8
2. INtroDuctIoN
Heavy duty steel framework with powder coated finish. Creeper seat ideal for prolonged low level jobs. Easy rolling Ø70mm composite swivel
castors. Features vinyl covered seat pad and adjustable backrest for added comfort.
3. specIFIcatIoN
model no: ....................................................................scr85
seat height: ................................................................ 150mm
overall size (W x d x H): .........................730 x 320 x 610mm
4. asseMblY
4.1. Fit seat base to cross members using 3 screws on each.
4.2. fit castors to end of each of cross member. locate braked castors at front of creeper.
4.3. Insert seat backrest/extension to desired position. Either vertical as a seat backrest or horizontal as the extension for creeper, see fig.2.
secure with pin, see fig.1.
4.4. Seat backrest height is adjustable. Remove pin, see fig.1 and adjust to desired position.
Fig.1
© Jack sealey limited
instructions for
low level creeper seat
scr85
model no:
Fig.2
Original Language Version
sCR85 | Issue:1 12/11/16