Kenwood MG510 Series Instructions Manual page 7

Misuse of your appliance can result in
injury.
This appliance shall not be used by
children. Keep the appliance and its cord
out of reach of children.
Children should be supervised to ensure
that they do not play with the appliance.
Only use the appliance for its intended
domestic use. Kenwood will not accept
any liability if the appliance is subject to
improper use, or failure to comply with
these instructions.
Use the meat grinder to process
meat, poultry and fish. Use the
inclusive attachments to shape
sausages and kebbe.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the appliance.
This appliance conforms to EC
Regulation 1935/2004 on materials
and articles intended to come into
contact with food.
before using for the first
time
1 Wash the parts see 'care and
cleaning'
mincer
power unit
attachment outlet
locking screw
on/off switch
reverse switch
spanner
ring nut
mincer screens: fine, medium,
coarse
cutter
scroll
mincer body
tray
pusher
pusher lid
dish/cover
to assemble
1 Fit the scroll inside the mincer
body.
2 Fit the cutter – cutting side
outermost
seated properly – otherwise
you could damage your
mincer.
3 Fit a mincer screen
notch over the pin.
Use the fine screen for raw meat;
fish; small nuts; or cooked meat for
shepherd's pie or meat loaves.
Use the medium and coarse
screens for raw meat; fish and
nuts.
4 Loosely fit the ring nut.
5
. Ensure it's
. Put the