Prepare The System For A Run - GE AKTA GO Operating Instructions Manual

5 Prepare the system for a run

5 Prepare the system for a run
About this chapter
This chapter gives instructions on how to prepare the ÄKTA go system for a run and
what to do before the first run.
Safety precautions
In this chapter
This chapter contains the following sections:
Section
5.1 Prepare the flow paths
5.2 Prime inlets and purge pump heads
5.3 Performance tests
5.4 Connect a column
5.5 Pressure alarms
5.6 Prepare for a run at low temperature
60
WARNING
Explosion hazard. To avoid building up an explosive atmosphere
when using flammable liquids, make sure that the room ventilation
meets the local requirements.
CAUTION
Fire hazard. Before the system is turned on, make sure that there
is no unintentional leakage of flammable liquids in ÄKTA go.
ÄKTA go Operating Instructions 29360951 AC
See page
61
64
70
74
77
78