Table of Contents
Advertisement
CY-PAD1003N
CONTENTS
1 ABOUT LEAD FREE
SOLDER (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF
stamp on the PCB.
Caution :
• • • • Pb free solder has a higher melting point than standard
solder; Typically the melting point is 50 - 70°F (30 -
40°C) higher. Please use a soldering iron with
temperature control and adjust it to 700 ± 20°F (370 ±
10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
• • • • Pb free solder will tend to splash when heated too high
(about 1100°F/600°C)
• • • • This lead free solder will be used for the products after
serial No. 1,000,001.
2 FEATUERS
• • • • 1100 W × 1channel maximum power output
• • • • Low-Pass Filter for subwoofer
• • • • Hight Level Speaker Input connection
• • • • Bass boost control system
• • • • Crossover Frequency Control
• • • • RCA output terminals
• • • • 5.1-channel Surround System (Combination with other
Panasonic car audio products)
Page
2
2
2
2
3
3 REPLACEING THE FUSE
Use fuses of the same specified rating 25 amps. Using different
substitutes or fuses with higher ratings, or connecting the unit
directly without a fuse, could cause fire or damage to the stereo
unit.
4 DIMENSIONS
2
Page
4
9
10
15
19
Advertisement
Table of Contents
