English 190 MM CORDLESS CIRCULAR SAW DCS573 Congratulations! EC‑Declaration of Conformity You have chosen a D WALT tool. Years of experience, thorough Machinery Directive product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data Cordless Circular Saw DCS573...
Page 9
English h ) Do not let familiarity gained from frequent use of contacts eyes, additionally seek medical help. Liquid tools allow you to become complacent and ignore ejected from the battery may cause irritation or burns. tool safety principles. A careless action can cause severe e ) Do not use a battery pack or tool that is damaged injury within a fraction of a second.
English Further Safety Instructions for All Saws accidentally dropped, lower guard may be bent. Raise the lower guard with the retracting handle and make sure Kickback Causes and Related Warnings: it moves freely and does not touch the blade or any other •...
English Chargers of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply WALT chargers require no adjustment and are designed to be when there is no battery pack in the cavity. Unplug charger as easy as possible to operate.
English 3. The completion of charge will be indicated by the red light charger within reach of an electrical outlet, and away from a remaining ON continuously. The battery pack is fully charged corner or other obstructions which may impede air flow. Use and may be used at this time or left in the charger.
English • Contents of opened battery cells may cause respiratory the latest regulations for packaging, labeling/marking and irritation. Provide fresh air. If symptoms persists, seek documentation requirements. medical attention. The information provided in this section of the manual is WARNING: Burn hazard. Battery liquid may be flammable provided in good faith and believed to be accurate at the time if exposed to spark or flame.
English such marks by D WALT is under license. Other trademarks and Do not charge damaged battery packs. trade names are those of their respective owners. • Check for damage to the tool, parts or accessories which may have occurred during transport. Do not expose to water. •...
English Young children and the infirm. This appliance is not • the saw). Do not assume that the printing on the blade intended for use by young children or infirm persons will always be facing you when properly installed. When without supervision. retracting the lower blade guard to install the blade, check the condition and operation of the lower blade guard to •...
Page 16
English all warnings and precautions as well as proper b. Cutting through material supported at the outer ends operation of the saw. Check the lower blade guard only can cause kickback. As the material weakens it sags, for proper closing before each use. If the lower blade closing down the kerf and pinching the blade (Fig. L).
English Any other conditions which could result in pinching, along cutting lines penciled on the material being cut. The kerf binding, twisting, or misalignment of the blade could cause indicator lines up with the left (outer) side of the saw blade, kickback. Refer to the sections Further Safety Instructions for which makes the slot or “kerf”...
Page 18
English WARNING: To reduce the risk of serious personal laboring. Hardness and toughness can vary even in the same piece of material, and knotty or damp sections can put a heavy injury, ALWAYS hold securely in anticipation of a load on the saw. When this happens, push the saw more slowly, sudden reaction.
English A dust extraction port 24 is supplied with your tool. WARNING: Never use solvents or other harsh chemicals for cleaning the non‑metallic parts of the tool. These The dust extraction port allows you to connect the tool chemicals may weaken the materials used in these parts. to an external dust extractor, either using the AirLock™...
English in applications where excessive build‑up is encountered, such as • Run the battery pack down completely, then remove it from pressure treated and green lumber. the tool. • Li‑Ion cells are recyclable. Take them to your dealer or a Optional Accessories local recycling station.
Page 24
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)