Philips EssentialCare BHD019 User Manual

Register your product and get support at
www.philips.com/welcome
EN User manual ZH-TW 使用手冊
d
a
b
c
Specifications are subject to change without notice
© 2018 Koninklijke Philips N.V.
All rights reserved.
3000 032 03071
English
Congratulations on your purchase, and welcome to Philips!
To fully benefit from the support that Philips offers, register
BHD019
your product at www.philips.com/welcome.
1 Important
Read this user manual carefully before you use the
appliance and keep it for future reference.
WARNING: Do not use this
•
appliance near water.
When the appliance is used in
•
a bathroom, unplug it after use
since the proximity of water
presents a risk, even when the
appliance is switched off.
WARNING: Do not use this
•
appliance near bathtubs,
showers, basins or other
vessels containing water.
Always unplug the
•
appliance after use.
If the appliance overheats,
•
it switches off automatically.
Unplug the appliance and let
it cool down for a few minutes.
Before you switch the appliance
on again, check the grilles to
make sure they are not blocked
by fluff, hair, etc.
If the main cord is damaged,
•
you must have it replaced
by Philips, a service centre
authorised by Philips or similarly
qualified persons in order to
avoid a hazard.
This appliance can be used
•
by children aged from 8 years
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved. Children
shall not play with the
appliance. Cleaning and user
maintenance shall not be made
by children without supervision.
For additional protection, we
•
advise you to install a residual
current device (RCD) in the
electrical circuit that supplies
the bathroom. This RCD must
have a rated residual operating
current not higher than 30mA.
Ask your installer for advice.
Do not insert metal objects
•
into the air grilles to avoid
electric shock.
Never block the air grilles.
•
Before you connect the
•
appliance, ensure that the
voltage indicated on the
appliance corresponds to the
local power voltage.
Do not use the appliance
•
for any other purpose than
described in this manual.
Do not use the appliance on
•
artificial hair.
When the appliance is
•
connected to the power, never
leave it unattended.
Never use any accessories or
•
parts from other manufacturers
or that Philips does not
specifically recommend. If you
use such accessories or parts,
your guarantee becomes invalid.
Do not wind the main cord
•
round the appliance.
Wait until the appliance has
•
cooled down before you store it.
Do not pull on the power cord
•
after using. Always unplug the
appliance by holding the plug.
Do not operate the appliance
•
with wet hands.
Always return the appliance to
•
a service centre authorized by
Philips for examination or repair.
Repair by unqualified people
could result in an extremely
hazardous situation for the user.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
Recycling
-Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in
an official collection point for recycling. By doing this,
you help to preserve the environment.
- Follow your country's rules for the separate
collection of electrical and electronic products. Correct
disposal helps prevent negative consequences for the
environment and human health.
2 Dry your hair
Connect the plug to a power supply socket.
1
Attach the nozzle ( ) onto the hairdryer for more
2 d
concentrated drying experience.
Adjust the airflow switch ( ) to for gentle airflow and
3 b
styling, or for strong airflow and fast drying.
Adjust the temperature switch ( ) to for hot airflow,
4 a
for efficiently drying your hair at a constant caring
temperature, or cool shot setting for cool airflow to fix
your style.
» The appliance with ionic function provides additional
shine and reduces frizz. It automatically activates when
the appliance is switched on. The ions may produce a
special odor. It is normal and caused by the ions which
are generated.