Page 3
MVG220 is designed with function button and LCD touch screen, which can switch the Gimbal working mode, control the rotation and the parameters setting by one hand.
1. Product Overview Overview Professional 3-axis gimbal designed for DSLR and mirrorless cameras, designed with function buttons and LCD touch screen. Quick Release Plate 1/4 inch Thread Hole Touch Screen Camera Connection Fixed Plate Arca Quick Release Plate Bluetooth Slid Multifunction Knob Control Battery Level Tilt Axis...
Page 5
Safety Lock for Arca Cross Arm Quick Release Plate Cross Arm Lock Sliding Arm Screw Sliding Arm Lock Screw Roll Axis Lens Holder Roll Axis Position Lock Thumb Screw Lock Vertical Arm Quick Release Plate Safety Lock Pan Axis Pan Axis Position Lock Multifunction Knob Trigger Button Press &...
Page 6
Standard kit accessories USB 2.0 to Micro USB 3.0 to Micro 3.0 USB 2.0 to Mini USB 2.0 to Type C Type C to Multi DC 2.5mm (Panasonic Shutter Cable) x1 Anti-slip Metal Tripod Versatile Arm...
1) Please mount the camera and balance it before Power ON. 2) When the battery is low, please charge the Gimbal. 3) When not in use for a long time, power off the Gimbal. 4) For quick start, utilising MVG220 basic features follow the steps below. 2.1 Charging ⚠...
2.2 Position Lock Each rotating axis has a position lock for convenient balancing and storage. Be sure to unlock the position locks before using the Gimbal. Stored lock status Balanced lock status Download Manfrotto Gimbal app.
⚠ Make sure the battery and memory 2.3 Camera Installation card are installed before camera installation. Step 1: Mount quick release plate Step 2: Mount camera on ARCA ① on fixed plate ②, lock it. Loosen quick release plate ④ the ARCA quick release plate safety lock ③, take out ARCA quick release plate ④.
2.4 Gimbal Balancing TIPS 1) Before balancing the Gimbal, please lock the Gimbal at the balanced lock status. 2) Lens cover should be removed from the camera and the memory card needs to be inserted to the camera to complete all the connections to ensure that the camera is ready for shooting.
Page 11
(2) a. Place the camera lens forwards, check the gravity center of camera. b. Unlock the quick release plate safety lock ①, adjust camera position until it can stay stable at any angles. c. Lock the safety lock ①. Tilt the camera up or down, if it stays stable, it means balanced.
2.4.3 Balance Pan Axis ① a. Tighten the roll axis position lock after balanced tilt axis and roll axis. Unlock pan axis position lock ②, loosen vertical arm lock screw ③. b. Hold the handle angled to 15°~ 20°, check the camera's movement (roll axis will point down if not balanced).
Page 13
② Follow Mode The roll direction is fixed, and the camera moves according to the left-right or up-down movements of the user's hand. ③ All follow Mode The camera moves according to the user's hand. ④ Lock Mode The orientation of the camera is fixed. ⑤...
Protrait Mode Single tap Portrait menu on screen to enter portrait mode for livestream/Tiktok. To get more videography skills with Gimbal and it's tutorial, please kindly visit our official or download Manfrotto Gimbal App. http://www.manfrotto.com 3.2 Button Operation Mode Button...
Page 15
3.2.3 Function button operation Button Function Description Function Button Photography/video recording Single tap 3.2.4 Joystick Joystick Button Function Description 1. Camera lens move to upward, select the Move to upward option above on display 2. Camera lens move to downward, select Move to downward the option below on display Joystick...
Page 16
3.2.6 Trigger button Button Function Description 1. Follow mode Press & hold 2. Reset Double tap Trigger Button 3. Selfie shooting (Pan axis rotate 180° Triple tap to shoot) 3.2.7 Multi-function knob Multi-function Knob Button Function Description 1. Control the current axis Rotate knob (default pan rotation mode) rotate direction 2.
3.3 USB Port There are USB2.0 and Type C port at the fixed plate, which enable to connect to camera/follow focus and other devices. Camera connecting USB port UART1 Camera connecting Type-C port UART2...
3.4 Touch Screen 3.4.1 Screen Multifunctional Knob Control Bluetooth Connection Camera Connection Battery Level All Lock Mode Pan Mode All Follow Mode Follow Mode Icon Mode Icon Mode Camera Connected/Photography All Lock Mode Camera Unconnected Pan Mode Video Recording Mode Follow Mode Bluetooth Connected All Follow Mode...
Page 19
3.4.2 Display screen switch Home Page Inception Mode Payload setting Motion Timelapse Shooting Mode Selfie Portrait Knob Setting Settings First Page Second Page Third Page 3.4.3 Usage of touch screen Slide right to left: Flip to the right sub page. Slide left to right: Flip to the left sub page/return to previous option.
3.5 Modes Setting Description: Slide right to left Slide left to right Tap to select current menu 3.5.1 Inception Mode setting Single tap Inception Mode on screen, the camera lens will rotate to upward. Holding the Gimbal horizontally, and set rotation direction/speed/one circle or continuous circle.
Page 21
Action Mode Customize Settings Higher sensitivity gives faster reaction of Gimbal/camera. Payload setting Sensitivity Shooting Mode Camera ctrl Knob Setting Auto Focus Settings Sensitivity Camera ctrl Gimbal ctrl Sensitivity WL W/T&F/F Camera ctrl USB Ctrl Camera ctrl MVG220 Auto Focus...
Photo interval Stall time for shooting Method 1: Set the Motion-timelapse mode parameters on Manfrotto Gimbal App. Enter the parameter setting interface to select the Motion-timelapse mode for setting. The maximum interval time is 59 seconds, while maximum staying time...
Page 23
Note: The photographing interval setting must be longer than the stop time and less than the panning or the tilting rotation time. Method 2: Set the Motion-timelapse mode parameters by entering the Motion Timelapse interface on screen. Operate with joystick to set up time setting parameter on touch screen.
Page 24
3.6.2 Route setting (1) Enter Route setting interface under Motion timelapse menu. Inception Mode Time Setting Motion Timelapse Route Setting Selfie Portrait Use the last setting (2) Set the start position Rotate the pan or tilt axis to a desired position, hold on for 0.5 seconds. Tap OK on screen to record a start position.
Exit ESC icon on screen to exit mode and reset. To get more videography skills with Gimbal and it's tutorial, please kindly visit our official or download Manfrotto Gimbal App. http://www.manfrotto.com 3.7 Initialization Initialization the Gimbal when: (1) The camera is not in balance.
ESC on the screen to wake up. 3.8 Manual Lock Manually move camera to desired position, and hold for half a second. New tilt and/or pan positions are automatically saved. 4. Manfrotto Gimbal App 4.1 Download Manfrotto Gimbal App Download Manfrotto Gimbal App.
(6) Select Wi-Fi name which get on step (2) in the camera model list on App, input the password. Most of the function can be achieved on App, such orient control/mode switch/parameter setting etc. If the connection failed, please confirm if the password is correct or exit and try to login Manfrotto Gimbal App again.
4.3 Firmware Upgrade Upgrade firmware via App. (1) Tap upgrade ICON on App. (2) Select upgrade type. (3) Follow the prompts to upgrade the firmware. Upgrade type introductions Repair/update or newly add button/touch screen/ Keyboard update interaction functions, update more compatibility cameras which can be controlled through Wi-Fi.
5. Accessories 5.1 Tripod MVG220 is equiped with 1/4 inch thread hole and 3/8 inch thread hole to mount all type of Tripod for standing shooting. 5.2 Versatile Arm Installation: Install the versatile arm on the handle, align screw holes and tighten the screws by L shape wrench.(it is attached on versatile arm, the...
Manfrotto has made and may make available. Manfrotto accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of product. Manfrotto will not provide any service for any product obtained from abnormal channels.
Page 31
3.DO NOT disassembly the product except marked detachable. It need send to Manfrotto after-sales or authorized service center to fix it if you accidently disassembly and cause abnormal work. The relevant costs are borne by user.