Convert Powerpoint Data To Still/Moving Images - Panasonic LFE Series User Manual

7. Convert PowerPoint data to still/moving images

Files created with PowerPoint can be converted to still or moving images and delivered as content.
Configure PowerPoint page settings in advance!
* Compatible with Microsoft PowerPoint 2010/2013.
* Depending on settings, resolution may be lost when converting from PowerPoint, so we recommend that you configure these
settings beforehand.
* These settings are for PowerPoint 2010. Depending on the version, the size may be slightly different. In that case, please fine-tune
the width and height.
Start PowerPoint and open [Design] ⇒ [Page Setup]. In the case of
Configure the settings as follows.
Slide size Slide size settings (S)
16:9 User setting
4:3 User setting
(Caution) If there is a PowerPoint file being edited, please save it in advance.
1. Import PowerPoint data.
(1) Select [Content list name] to save the converted PowerPoint data.
(2) Click [Use a PowerPoint].
(3) Click [Select], select the PowerPoint data to be converted, and click [Open].
(1)
(2)
2. Convert the imported PowerPoint data.
(1) To convert to a still image: Click [Convert (.JPG)].
To convert to a moving image: Click [Convert (.WMV)].
(2) When conversion is completed, a [Process complete] message
will be displayed under the image.
(3) Click [Close] to close the screen.
(4) The converted data will be displayed on the content list.
Click [Save] to save to USB memory.
Even when not saving to USB memory, click [Save] to save the content list.
(The explorer screen will open, but close it without performing any operations.)
* When converting to still images, animation effects, etc. will be discarded.
* When converting to moving images, conversion may take time depending on set conditions such as animation effects,
number of slides, etc.
Width (W) Height (E)
67.73cm 38.11cm
50.80cm 38.10cm
(3)
(1)
17
(3)