Table of Contents
Advertisement
Memory slot cover
Base of a Satellite 1105 computer
4
Using a standard Phillips no. 1 screwdriver, unscrew the
two screws that secure the expansion memory slot cover,
then remove the memory slot cover.
5
Put the screws and the cover in a safe place so that you
can retrieve them later.
CAUTION: Static electricity can damage the memory module.
Before you handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to touch its
gold connector bar (on the side you insert into the computer).
6
Remove the memory module from its antistatic
packaging.
7
Holding the memory module by its edges so that the gold
connector bar faces the slot, fit the module into the
socket.
Installing additional memory (optional)
Getting Started
49
Advertisement
Table of Contents
