Attachment Safety; Maintenance And Storage Safety; Safety And Instructional Decals - Toro TX 1000 Operator's Manual

Attachment Safety

•
Always lower the attachment each time you shut
off the machine or leave the operating position.
•
Clean any dirt or debris that may hinder connecting
the attachment to the machine. Ensure that the
attachment-locking pins are fully seated in the
holes of the attachment-mount plate. Refer to the
Operator's Manual for the machine for detailed
information on safely connecting an attachment to
your machine.
•
When lifting the attachment keep it level and
prevent the load from spilling backward.
Maintenance and Storage
Safety
•
Check fasteners at frequent intervals for proper
tightness to ensure that the equipment is in safe
operating condition.
•
Refer to the Operator's Manual for important
details if you store the attachment for an extended
period of time
•
Maintain or replace safety and instruction labels,
as necessary.
Safety and Instructional
Decals
Safety decals and instructions are
easily visible to the operator and are
located near any area of potential
danger. Replace any decal that is
damaged or missing.
1. Tipping hazard—read the Operator's Manual; for the TX
1000 do not exceed loads of 272 kg (600 lb); for other
models do not exceed loads of 91 kg (220 lb).
1. Tipping hazard—read the Operator's Manual; for the TX
1000 do not exceed loads of 272 kg (600 lb); for other
models do not exceed loads of 91 kg (220 lb).
4
133-0219
133-0220
decal133-0219
decal133-0220