Sanyo 8200 Phone Manual page 11

and Connecting... followed by "You have floor. " You can now
begin speaking.)
- or -
Highlight the contact you want to call and press and release
to place the call. (The call will connect as described above, but
"Floor is open. " will appear on the screen and either you or your
contact may press and hold
4. Continue holding
speaking, release the Ready Link (Memo) button to allow other
contacts to speak. (When the other party takes the floor, you will
see the speaker's name and phone number and the text "has
floor. " )
5. When you are finished, press
Making a Ready Link Call by Entering a Number
To place a Ready Link call by entering a number:
1. From standby mode, enter the Ready Link number you want to dial.
2. Press
to take the floor and speak.
• The contact's name appears on the display if there is a matched
number in your Ready Link List.
3. Continue with the Ready Link call, pressing and holding
to speak and releasing it to allow others to reply.
4. When the call is finished, press
- or -
1. Press R-Link (left softkey) or press
List.
2. Press Go to (left softkey), highlight Enter R-Link# and press
3. Enter the Ready Link number you want to dial.
4. Follow steps 2-4 above.
as you speak. When you are finished
to place the Ready Link call. Continue holding
to take the floor and speak.)
to access the Ready Link