Table of Contents
Advertisement
Plugging in the scanner
1. Check the label on the back of the scanner to make sure
2. Make sure the scanner is turned off. The power is off when
3. Connect the power cord to the AC inlet on the back of the
Downloaded from:
that the voltage required by the scanner matches that of the
electrical outlet it will be plugged into. Also, make sure that
you have the correct power cord for your power source.
the P OPERATE button is raised.
scanner, and plug the other end into a properly-grounded
electrical outlet.
http://www.usersmanualguide.com/
Setting Up the Copy Station
29
Advertisement
Table of Contents
