Configuration From Saved File - Bosch Dexter Tow Assist Installation Manual

2. When no configuration is loaded, the program start screen will
look like the image below.
3. Select the axle variant. Enter the width, aspect ratio and rim
size for the tire.
2021.01 | 10
4. After configuration selections have been made, click the Save
Config button. Type in the desired file name and hit save. File
type must remain as (*.cfg).
5. The current data on the screen after the config file was saved
can still be edited and saved under another name if needed.
Reload the config file or restart the program to force data to be
not editable on screen.

Configuration from Saved File

After parameter file has been created, the production personnel can
now configure the ECU.
TOW ASSIST INSTALLATION MANUAL
ABS & SWAY MITIGATION SYSTEM