Table of Contents
Advertisement
40
Using the dynadock™ and Adjusting Settings
Using the dynadock™ software
NOTE
Disable/Enable pop-up messages
The Options tab of the Wireless USB Manager enables you to
disable or enable pop-up messages that appear in the System
tray/Notification Area of your Windows
pop-up message informs you when an associated wireless USB
device, such as the dynadock™, has been connected or
disconnected from your computer. These messages are enabled by
default.
(Sample Image) The Options tab
Change/Select the channel used for radio communication
The Communications tab of the Wireless USB Manager enables
you to view and change radio settings. The default channel setting
is Automatic, which enables the host radio to automatically locate
an available channel for communications.
NOTE
If you permanently remove the device, you will not be able to
connect to that particular device again until the device has been
re-associated. To re-associate the device, follow the instructions in
the section
"Set up a wireless connection" on page
It is recommended to leave this setting on Automatic. If you manually
select a channel that is being used by another dynadock™ in the
vicinity, the channel bandwidth will be shared by both devices. To
maximize performance, a separate channel should be used for each
dynadock™.
24.
®
desktop. For example, a
Advertisement
Table of Contents
