Charging The Battery; Handling And Operation; Switching On/Off And Setting The Speed - Silvercrest SVU 3.7 A1 Operating Instructions Manual

Charging the battery

Before using the fan, the integrated battery must be charged. When using the mains
adapter, the fan can also be used during charging.
CAUTION
► Charge the battery only in dry indoor areas.
► Due to the high power consumption, the battery should only be charged using
the supplied mains adapter 8. Do not charge the fan from the USB port of a
PC or notebook.
If you do not want to use the appliance, remove the mains adapter 8 after
►
charging has been completed!
Plug the mains adapter 8 into an easily accessible power socket.
♦
Connect the USB-C plug of the mains adapter 8 to the charging port 7 on
♦
the fan. The operating LED 1 lights up orange during charging. As soon as the
operating LED 1 goes out, the integrated battery is fully charged.
NOTE
If the operating LED 1 flashes orange while the fan is in use, the integrated
►
battery is exhausted and must be charged.

Handling and operation

Switching on/off and setting the speed
button 6 to set the fan to a low speed. The operating LED 1
♦ Press the
lights up blue.
button 5 repeatedly to switch between the three speed levels
♦ Press the
(low, medium, high).
button 6 again to turn off the fan. The operating LED 1 goes out.
♦ Press the
SVU 3.7 A1
GB │ IE
│ 7 ■